| Availability: | |
|---|---|
| Quantity: | |
DN65
Product Description
This straight ball valve is a forged aluminum alloy flow-control component for fire trucks and firefighting apparatus. Its vertical inline NH 2.5" male outlet connects directly to the downstream hose or pipeline without an angled offset, while the flanged base fixes the valve to the truck body or pump panel. The anodized surface protects the alloy body against weather and repeated field use, and the quarter-turn ball mechanism opens or cuts off flow with a single short turn. The lever handle is fitted with a rotating locking grip: once the valve is set, the grip locks the lever in place so vibration, hose drag or contact during response cannot shift the valve status. The valve is suited to onboard water and foam lines; bore, connection standard and finish can be adapted to the customer's truck configuration.
Straight inline outlet — vertical NH 2.5" male end for direct line connection, no elbow offset.
Forged aluminum alloy body — lightweight, high-strength one-piece forging.
Anodized finish — corrosion-resistant surface for outdoor apparatus service.
Lockable lever handle — rotating top grip locks the lever in position against accidental operation.
Quarter-turn shut-off — fast open/close under field pressure.
Flanged mounting base — secure bolted installation on truck or pump panel.
Apparatus-duty design — built for vehicle vibration and pressure surges.
Customizable — connection standard, bore, color and branding on request.
Operation
Bolt the valve to the apparatus panel or pump outlet, then connect the downstream line to the NH male outlet. Turn the lever 90° to OPEN or CLOSE and read the position from the indicator. After setting the required position, rotate the grip at the handle top to lock the lever in place. To reposition, rotate the grip back to release the lock, move the lever, then re-lock. Do not use extended leverage or impact tools.
Maintenance
Inspect stem, seals, thread and lock grip regularly; confirm the lever stays locked after locking. Replace worn seats or the lock mechanism promptly. Flush after foam service to remove concentrate residue. Store spares in a dry, ventilated area away from corrosives.
content is empty!
content is empty!
content is empty!