| Availability: | |
|---|---|
| Quantity: | |
DN65
Product Description
This ball valve is a forged aluminum alloy flow-control component designed for fire truck and apparatus mounting. Its upper connection is an NH 2.5" female swivel coupler assembled on a ball-bearing mechanism: once the hose or male fitting is connected, the coupler can rotate smoothly with the line movement, so the hose is not twisted, bent or kinked when the vehicle moves or the line is dragged. The quarter-turn ball mechanism opens or cuts off flow with a short turn, and the lever handle can be locked in the selected position to prevent accidental operation. The anodized body provides corrosion resistance for onboard water and foam lines, while the flanged base gives a secure bolted installation on the truck body or pump panel. Connection standard, bore, pressure rating and finish can be adapted to the customer's configuration.
Ball-bearing female swivel — the NH 2.5" female end rotates freely to follow hose movement and prevent kinking.
Forged aluminum alloy body — lightweight, high-strength one-piece forging.
Anodized finish — corrosion-resistant surface for outdoor apparatus service.
Quarter-turn shut-off — fast open/close under field pressure.
Lockable lever handle — rotating grip holds the lever in the selected position.
Flanged mounting base — secure bolted installation on truck or pump panel.
Apparatus-duty design — built for vibration, pressure surges and rapid deployment.
Customizable — connection standard, bore, color and branding on request.
Operation
Bolt the valve to the apparatus panel or pump outlet, then connect the male hose fitting to the NH female swivel coupler. Turn the lever 90° to OPEN or CLOSE and read the position from the indicator. The coupler may rotate with the hose during deployment; do not force the hose against the swivel. After setting the required position, rotate the grip at the handle top to lock the lever; release the grip before repositioning.
Maintenance
Inspect the swivel bearing for smooth rotation, leaks and corrosion; check seals, stem and lock grip regularly. Replace worn seats or bearing parts promptly. Flush after foam service to remove concentrate residue. Store spares in a dry, ventilated area away from corrosives.
content is empty!
content is empty!
content is empty!